Acer Liquid Z330 (acer-t01)
 |
This page is about the dedicated port of this device. There is also an optional generic port available for this device - see Generic MSM8909 (qcom-msm8909). |
| Manufacturer | Acer |
|---|---|
| Name | Liquid Z330 |
| Codename | acer-t01 |
| Released | 2015 |
| Type | handset |
| Hardware | |
| Chipset | Qualcomm Snapdragon 210 (MSM8909) |
| CPU | Quad-core 1.1 GHz Cortex-A7 |
| GPU | Adreno 304 |
| Display | 480x854 |
| Storage | 8 GB |
| Memory | 1 GB |
| Architecture | armv7 |
| Software | |
Original software  The software and version the device was shipped with. |
Android 5.1 |
| postmarketOS | |
| Category | testing |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. |
806.2 |
| Optional Generic Port | Generic MSM8909 (qcom-msm8909) |
| Device package |
 device-acer-t01 |
| Kernel package |
linux-postmarketos-qcom-msm8916 |
Flashing It is possible to flash the device with pmbootstrap flasher. |
Works
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Battery Charging and battery level reporting works |
Works
|
Screen Display works. Ideally with sleep mode and brightness control. |
Partial
|
Touchscreen |
Works
|
| Multimedia | |
3D Acceleration |
Partial
|
Audio Audio playback, microphone, headset and buttons. |
Broken
|
Camera |
Broken
|
| Connectivity | |
WiFi |
Works
|
Bluetooth |
Works
|
GPS |
Broken
|
| Modem | |
Calls |
Broken
|
SMS |
Broken
|
Mobile data |
Broken
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
| Sensors | |
Accelerometer Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile |
Works
|
Proximity |
Broken
|
| This device is based on the Snapdragon 210. See the SoC page for common tips, guides and troubleshooting steps |
Variants
There are also 3G / Windows Phone variants:
- Acer Liquid Z330 (Android LTE)
- Acer Liquid Z320 (Android 3G)
- Acer Liquid M330 (Windows Phone LTE)
- Acer Liquid M320 (Windows Phone 3G)
Users owning this device
- Bolilingmeng89006 (Notes: Z330)
- WonderfulShrineMaidenOfParadise
Installation
| 🚧 | This page is a work-in-progress. Some information contained within may be inaccurate or incomplete. |
lk2nd is a secondary bootloader that provides a standard fastboot interface, which can be used to boot postmarketOS without Android boot flashed or pmbootstrap flasher flash_kernel.
- The prebuilt image doesn't have the device included at the moment. Build lk2nd first.
- Boot your phone to bootloader (fastboot) mode.
- Follow lk2nd instructions from step 2 to install lk2nd. Basically flash it to the boot partition (
fastboot flash boot build-lk2nd-msm8909/lk2nd.img) - Follow Qualcomm_Snapdragon_410/412_(MSM8916)#Installation to install postmarketOS.
|
Note: Enter lk2nd fastboot mode by pressing after booting (this time wait until it vibrates then press ! |
Panel Display
Using simple-framebuffer instead of DRM panel driver due to missing MDP3 support in mainline Linux for now.
Backlight is not controlled by the panel.
Sometimes the panel doesn't show anything.
Touchscreen
(phoc:3653): phoc-wlroots-CRITICAL **: 09:03:35.192: [libinput] event3 - MStar TouchScreen: client bug: event processing lagging behind by 63ms, your system is too slow
Touchscreen doesn't work in Phosh.
Audio
GPS
Proximity Sensor
See also
- pmaports!4488 Initial merge request
- device-acer-t01
- firmware-acer-t01