Amediatech X96 max plus (amediatech-x96-max-plus)
| This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. |
 X96 Max Plus | |
| Manufacturer | Amediatech |
|---|---|
| Name | x96 Max Plus |
| Codename | amediatech-x96-max-plus |
| Released | 2019 |
| Type | set-top box |
| Hardware | |
| Chipset | Amlogic S905X3 |
| CPU | Quad-core 2 GHz Cortex-A55 |
| GPU | Mali-G31 |
| Display | HDMI |
| Storage | 16GB/32GB/64GB |
| Memory | 2GB/4GB |
| Architecture | aarch64 |
| Software | |
Original software  The software and version the device was shipped with. |
Android 9 |
| FOSS bootloader | partial |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
Flashing It is possible to flash the device with pmbootstrap flasher. |
Untested
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Untested
|
Screen Display works. Ideally with sleep mode and brightness control. |
Works
|
| Multimedia | |
3D Acceleration |
Works
|
Audio Audio playback, microphone, headset and buttons. |
Broken
|
IR TX |
Untested
|
| Connectivity | |
WiFi |
Broken
|
Bluetooth |
Broken
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB-A Full-sized USB-A port works (Usually applicable to SBCs and laptops). |
Works
|
USB OTG USB On-The-Go or USB-C Role switching |
Untested
|
HDMI/DP Video and audio output with HDMI or Display Port works. |
Works
|
| Sensors | |
Power Sensor Sensor to monitor current, voltage and power. Not fuel gauge! |
Untested
|
Contributors
- Petr Hodina
Users owning this device
- Rainbyte (Notes: OS: Armbian ; Model: Profiber Tv-box Pro 4G+32G)
How to enter flash mode
Installation
Use pmbootstrap to build your own installation image.
$ pmbootstrap init
$ pmbootstrap install --fde
See also
- pmaports!4108 Initial merge request