Asus ZenWatch 2 (asus-sparrow)
 Asus ZenWatch 2 in Fastboot mode | |
| Manufacturer | Asus |
|---|---|
| Name | ZenWatch 2 |
| Codename | asus-sparrow |
| Model | WI501Q |
| Released | 2015 |
| Type | watch |
| Hardware | |
| Chipset | Qualcomm Snapdragon 400 (APQ8026) |
| CPU | Quad-core 1.2 GHz Cortex-A7 |
| GPU | Adreno 305 |
| Display | 320x320 AMOLED |
| Storage | 4 GB |
| Memory | 512 MB |
| Architecture | armv7 |
| Software | |
| Original software | Wear OS |
Original version  The version the device was shipped with. |
1.0 |
| postmarketOS | |
| Category | testing |
Pre-built images Whether pre-built images are available here. |
no |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
Flashing It is possible to flash the device with pmbootstrap flasher. |
Works
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Battery Charging and battery level reporting works |
Broken
|
Screen Display works. Ideally with sleep mode and brightness control. |
Broken
|
Touchscreen |
Works
|
| Multimedia | |
3D Acceleration |
Broken
|
Audio Audio playback, microphone, headset and buttons. |
Broken
|
| Connectivity | |
WiFi |
Works
|
Bluetooth |
Works
|
GPS |
Untested
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
| Sensors | |
Accelerometer Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile |
Broken
|
Contributors
- MartijnBraam
- z3ntu
Entering Fastboot mode
Turn on your watch and swipe from the top left corner (so that be where 11 would be on the watch) as soon as you see the ASUS logo.
Device info
Partition info
Boot and recovery are 16MiB
(bootloader) partition: system, ,size: 0x20000000 ,type: ext4 (bootloader) partition: userdata, ,size: 0xa47fbe00 ,type: ext4 (bootloader) partition: cache, ,size: 0x19000000 ,type: ext4 (bootloader) partition: boot, ,size: 0x1000000 ,type: raw (bootloader) partition: recovery, ,size: 0x1000000 ,type: raw
DDR -> /dev/block/mmcblk0p6 aboot -> /dev/block/mmcblk0p5 abootbak -> /dev/block/mmcblk0p10 asusdata -> /dev/block/mmcblk0p13 asusdata2 -> /dev/block/mmcblk0p14 asusfw -> /dev/block/mmcblk0p20 asusgpt -> /dev/block/mmcblk0p21 asuskey -> /dev/block/mmcblk0p15 asuskey2 -> /dev/block/mmcblk0p16 asuskey3 -> /dev/block/mmcblk0p17 asuskey4 -> /dev/block/mmcblk0p18 asuskey5 -> /dev/block/mmcblk0p19 boot -> /dev/block/mmcblk0p11 cache -> /dev/block/mmcblk0p27 misc -> /dev/block/mmcblk0p23 pad -> /dev/block/mmcblk0p12 persist -> /dev/block/mmcblk0p24 recovery -> /dev/block/mmcblk0p25 rpm -> /dev/block/mmcblk0p3 rpmbak -> /dev/block/mmcblk0p8 sbl1 -> /dev/block/mmcblk0p1 sbl1bak -> /dev/block/mmcblk0p7 sdi -> /dev/block/mmcblk0p2 ssd -> /dev/block/mmcblk0p22 system -> /dev/block/mmcblk0p28 tombstones -> /dev/block/mmcblk0p26 tz -> /dev/block/mmcblk0p4 tzbak -> /dev/block/mmcblk0p9 userdata -> /dev/block/mmcblk0p29