Kickpi K2B H618 (kickpi-k2b-h618)
| This device is marked as not booting. |
| Manufacturer | Kickpi |
|---|---|
| Name | K2B H618 |
| Codename | kickpi-k2b h618 |
| Type | single board computer |
| Hardware | |
| Chipset | Allwinner H618 |
| CPU | 4× ARM Cortex-A53 @ 1.5 GHz |
| GPU | Mali-G31 MP2 |
| Storage | 8 / 32 GB |
| Memory | 1 / 2 / 4 GB |
| Architecture | aarch64 |
| postmarketOS | |
Mainline  Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
pmOS kernel The kernel version that runs on the device's port. |
6.x.x |
Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. |
0.0 |
Contributors
- CHANGE_ME (put your username here!)
Users owning this device
How to enter flash mode
Installation
Using pmbootstrap
Follow Installation/Using pmbootstrap. When asked for the device's vendor/codename, select FIXME as the vendor and FIXME as the codename.
To flash the image to the device:
- Enter flashing mode (see #How to enter flash mode)
- Run
pmbootstrap flasher flash_kernelto flash the kernel - Run
pmbootstrap flasher flash_rootfs