Samsung Galaxy Avant/Galaxy Core LTE (samsung-afyonltecan)
Appearance
Manufacturer | Samsung |
---|---|
Name |
Galaxy Avant/ Galaxy Core LTE |
Codename | samsung-afyonltecan |
Released | 2014 |
Type | handset |
Hardware | |
Chipset | Qualcomm Snapdragon 400 (MSM8226) |
CPU | Quad-core 1.2 GHz Cortex-A7 |
GPU | Adreno 305 |
Display | 540x960 |
Storage | 16 GB |
Memory | 1.5 GB |
Architecture | armv7 |
Software | |
Original software | Android |
Original version The version the device was shipped with. |
4.4.2 |
postmarketOS | |
Category | testing |
Pre-built images Whether pre-built images are available here. |
no |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
pmOS kernel The kernel version that runs on the device's port. |
3.4.113 |
Flashing It is possible to flash the device with pmbootstrap flasher . |
Works
|
---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Battery Charging and battery level reporting works |
Untested
|
Screen Display works. Ideally with sleep mode and brightness control. |
Broken
|
Touchscreen |
Untested
|
Multimedia | |
3D Acceleration |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Untested
|
Camera |
Untested
|
Connectivity | |
WiFi |
Untested
|
Bluetooth |
Untested
|
GPS |
Untested
|
Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB OTG USB On-The-Go or USB-C Role switching |
Untested
|
Sensors | |
Accelerometer Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile |
Untested
|
Note: For the Samsung Galaxy Core LTE: This page is about the SM-G386W only. Other variants like the SM-G386F use a different SoC and will require their own port. |
What works
- Flashing
- Booting
- USB Networking
What does not work
- Display turns off after Samsung logo
- Everything else untested
How to enter flash mode
Press and hold
+ + simultaneously. Then click to confirm.How to enter recovery mode
Press and hold
+ + simultaneously.Installation
Installation guide. Heimdall installation is not tested.