Jump to content

Samsung Galaxy E5 (samsung-e5)

From postmarketOS Wiki
Note This page is about the dedicated port of this device. There is also an optional generic port available for this device - see Generic MSM8916 (qcom-msm8916).
Samsung Galaxy E5
Manufacturer Samsung
Name Galaxy E5
Codename samsung-e5
Released 2015
Type handset
Hardware
Chipset Qualcomm Snapdragon 410 (MSM8916)
CPU 4x 1.2 GHz Cortex-A53
GPU Adreno 306
Display 720 x 1280
Storage 16 GB
Memory 1.5 GB
Architecture aarch64
Software
Original software Android
Original version
The version the device was shipped with.
4.4
Extended version
The most recent supported version from the manufacturer.
5.1.1
postmarketOS
Category testing
Pre-built images
Whether pre-built images are available here.
no
Mainline
Instead of a Linux kernel fork, it is possible to run (Close to) Mainline.
yes
pmOS kernel
The kernel version that runs on the device's port.
Mainline
Optional Generic Port Generic MSM8916 (qcom-msm8916)
Features
Flashing
It is possible to flash the device with pmbootstrap flasher.
Untested
USB Networking
After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system).
Works
Battery
Charging and battery level reporting works
Works
Screen
Display works. Ideally with sleep mode and brightness control.
Partial
Touchscreen
Works
Multimedia
3D Acceleration
Works
Audio
Audio playback, microphone, headset and buttons.
Partial
Camera
Broken
Connectivity
WiFi
Works
Bluetooth
Works
GPS
Works
NFC
Near Field Communication
Untested
Modem
Calls
Works
SMS
Works
Mobile data
Works
Miscellaneous
FDE
Full disk encryption and unlocking with unl0kr.
Untested
USB OTG
USB On-The-Go or USB-C Role switching
Works
Sensors
Accelerometer
Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile
Works
Proximity
Broken
Hall Effect
Also known as flip cover sensor
Works


Architecture

Note Note: Even though MSM8916 is capable of aarch64, the firmware of some variants were never updated with aarch64 support.

Variants

Model Codename Architecture Supported lk2nd
SM-E500F e5ltexx aarch64 ? Y
SM-E500H e53gxx aarch64 ? ?
SM-E500M e5lteub aarch64 ? ?
SM-E500YZ e5ltezt armv7 ? ?

Users owning this device

Installation

lk2nd is a secondary bootloader that provides a standard fastboot interface, which can be used to boot postmarketOS without Android boot flashed or pmbootstrap flasher flash_kernel.

  1. Download lk2nd-msm8916.img from Releases page on Github.
  2. Boot your phone to bootloader (Odin/Download) mode by holding Volume Down and Home while powering up.
  3. Follow lk2nd instructions to install lk2nd. Basically flash it to the boot partition (heimdall flash --BOOT lk2nd-msm8916.img)
  4. Follow Qualcomm_Snapdragon_410/412_(MSM8916)#Installation to install postmarketOS.
Note Note: Enter lk2nd fastboot mode by pressing only Volume Down + Power (without Home). Pressing Home additionally will bring you to the Samsung Download mode.

Audio

Warning WARNING: The speakers are rather loud on 100% volume and may produce distorted sound that may damage your speakers after long use. Please make sure to use reasonable volumes - your ears and your speaker will thank you!

Screen

Screen works partially. While displaying the UI works fine, adjusting the brightness doesn't work.

Touch keys

See Tm2-touchkey.

Flash LED

Currently WIP. It can be controlled with SG Micro SGM3140 charge pump LED driver[1].

Accelerometer

lis2hh12 accelerometer is not so stable for auto screen rotation, which suggests you to use fixed portrait or landscape mode.

GPS

No idea how to test yet.

Proximity Sensor

The driver for cm36672p proximity sensor is not available.

Photos

See also

References

OSZAR »