Samsung Galaxy Z Flip 3 (samsung-b2q)
| This device is marked as not booting. |
 Samsung Galaxy Z Flip 3 | |
| Manufacturer | Samsung |
|---|---|
| Name | Galaxy Z Flip 3 |
| Codename | samsung-b2q |
| Model | SM-F711B |
| Released | 2021 |
| Type | foldable handset |
| Hardware | |
| Chipset | Qualcomm Snapdragon 888 (SM8350) |
| CPU |
Octa-core (1x2.84 GHz 3x2.40 GHz and 4x1.80 GHz) Kryo 680 |
| GPU | Adreno 660 |
| Display | Visionox R66451 (main): Dynamic AMOLED 2X, HDR10+, 1080 × 2640, 6.7 in (17 cm), 22:9 aspect ratio, 426 ppi, HDR10+, 120 Hz refresh rate |
| Storage | 128 or 256 GB |
| Memory | 8 GB LPDDR5 RAM |
| Architecture | aarch64 |
| Software | |
Original software  The software and version the device was shipped with. |
Android 11 |
Extended version The most recent supported version from the manufacturer. |
Android |
| postmarketOS | |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
Contributors
Users owning this device
- Frieder.Hannenheim (Notes: Trying to port & Mainline)
How to enter flash mode
Hold Volume Up+Down and connect a USB cable.
Mainline status and hardware
| Component | Model | Status | Mainline driver available? | Notes |
|---|---|---|---|---|
| Main Display | Visionox R66451 | N | Y | |
| Main Touchscreen | Focaltech fts9cu80f/fts2ca78y | N | maybe |